MAXDATA PLATINUM 300 IR M6 Manuel d'utilisateur télécharger pdf (Page 21)

20 21MAXDATA PLATINUM 300 IR M6Server Utilities

Enter Boot Options Menu

When starting the server press F10 to enter the boot options menu after POST completes the

memory test.

The boot options menu allows you to select a boot device independant of the boot order set in the

BIOS.

This selection only affects the current boot process.

Clearing the CMOS

If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used

to reset the configuration RAM.

1. Power down the system and disconnect the AC power.

2. Open the server.

3. Move the jumper from the normal operation position, at pins 1 and 2 to the CMOS Clear

position, covering pins 2 and 3 as indicated in the following diagram.

Figure 7. Clearing the CMOS

4. Reconnect the AC power, power up the system.

5. When the system begins beeping, power it down and disconnect the AC power.

6. Return the CMOS Clear jumper to the Normal location, covering pins 1 and 2.

7. Close the server chassis.

8. Reconnect the AC power and power up the system.

Clear CMOS Jumper

(J9G3)

Clear

Normal

1 2 ... 16 17 18 19 20 21 22 23

Pas de commentaire

MAXDATA PLATINUM 300 IR M6 Manuel d'utilisateur Page 21