MAXDATA PLATINUM 300 IR M6 Manuel d'utilisateur télécharger pdf (Page 15)

MF 15MAXDATA PLATINUM 300 IR M6Hardware Installations and Upgrades

3 Hardware Installations and Upgrades

Before You Begin

Before working with your server product, pay close attention to the “Safety Information” at the

beginning of this manual.

Tools and Supplies Needed

• Phillips (cross head) screwdriver (#1 bit and #2 bit)

• Needle nosed pliers

• Antistatic wrist strap and conductive foam pad (recommended)

Installing and Removing Memory

The silkscreen on the board for the DIMMs displays DIMM_2B, DIMM_1B, DIMM_2A, DIMM_1A

starting from the edge of the board. DIMM_1A is the socket closest to the processor socket. See

„Memory“ for a discussion of the memory requirements and options.

Installing DIMMs

To install DIMMs, follow these steps:

1. Observe the safety and ESD precautions in “Safety Information”.

2. Turn off all peripheral devices connected to the server. Turn off the server.

3. Disconnect the AC power cord from the server.

4. Remove the server‘s cover.

5. Locate the DIMM sockets (see Figure 5).

Figure 5. Installing DIMMs

DIMM 2B

Socket

DIMM 1A

Socket

DIMM 2A

Socket

DIMM 1B

Socket

Bank 1

Bank 2

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Pas de commentaire

MAXDATA PLATINUM 300 IR M6 Manuel d'utilisateur Page 15