MAXDATA VISION 450T Manuel d'utilisateur télécharger pdf (Page 54)

Section 4 UPGRADING YOUR NOTEBOOK

4-11

To remove the memory module, do the following:

1. Follow steps 1~7 in the above section,

Installing the

DIMM Module In The Memory Socket

2. Press out on the latches located on both edges of the

expansion socket at the same time. The DIMM should

pop up to an angle of 30 degree.

3. Remove the DIMM from the expansion socket. Be sure

to save the DIMM for future use.

4. Put the keyboard back to its original face-up position. Be

aware of the flexible PCB connected to the keyboard.

The keyboard should now be locked by the spring-loaded

latches.

5. Power on the notebook and when it starts up note if the

memory count has decreased to the original memory

capacity.

You have completed the removal of the DIMM.

Removing the DIMM Module In The Expansion Socket

Illustration 4-7

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 87 88

Pas de commentaire

MAXDATA VISION 450T Manuel d'utilisateur Page 54