MAXDATA PLATINUM 100 I M7 Manuel d'utilisateur télécharger pdf (Page 5)

MF 5MAXDATA PLATINUM 100 I M7Setting up the System

1 Setting up the System

Safety Information

Server Position

Please take note of the following criteria for creating a practical and safe workplace when setting up

your computer:

CAUTION

The system can be used anywhere the temperature is suitable for people. However, rooms with

humidity over 70%, and dusty or dirty areas are not appropriate. In addition, do not expose the server

to any temperatures over +30°C or under +10°C.

CAUTION

For proper cooling and airflow, operate the system only with the chassis covers installed.

CAUTION

Make sure that the cables connecting the server to peripheral devices are not tight.

CAUTION

Make sure that all power and connection cables are positioned so that they are not trip hazards.

CAUTION

When you save data to your server‘s hard disks or to a floppy disk, they are stored as magnetic

information on the media. Make sure that they are not damaged by magnetic or electromagnetic

fields.

CAUTION

Because the electronics in your computer can be damaged by jarring, no mechanical devices should

be placed on the same surface as the server. This is especially important for impact printers whose

vibrations could damage the hard disk.

CAUTION

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on

power, telephone, and communication cables. Turn off the server and disconnect the power cord,

telecommunications systems, networks, and modems attached to the server before opening it.

Otherwise, personal injury or equipment damage can result.

CAUTION

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and other

parts. We recommend that you perform all procedures in chapter 3 only at an ESD workstation. If one

is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis

ground - any unpainted metal surface - on your server when handling parts.

ATTENTION

In order to fully separate the server from current, the power cord must be removed from the wall

outlet.

ATTENTION

To ensure stability, the floor stands must be turned outwards (pedestal version only).

1 2 3 4 5 6 7 8 9 10 ... 22 23

Pas de commentaire

MAXDATA PLATINUM 100 I M7 Manuel d'utilisateur Page 5