MAXDATA SR1202 M1 Guide de l'utilisateur Page 27
- Page / 58
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
MF 27MAXDATA SR1202 M1 – Technical User GuideGetting Started
3 Getting Started
Introduction
In this chapter, you are shown how to install your SR1202 enclosure into an industry standard 19
inch rack cabinet.
!
CAUTION
When connecting up the SR1202 enclosure, use only the power cords supplied or cords which match
the specification quoted in section “Power Cords” on page 24.
Planning Your Installation
Before you begin installation you should become familiar with the configuration requirements of your
SR1202 enclosure, detailed in Table 5. The correct positions of each of the optional plug-in modules
are shown in Figure 23. Please refer to sections “Fibre Channel Interface” to “Enclosures Expansions”
(page 31 to page 33) for details of SR1202 RAID Controller Module configurations.
Table 5. Enclosure System Configuration
Module Location
Drive Bays ALL drive bays must be fitted with a drive carrier module or dummy drive
carrier module; no bays should be left completely empty. A minimum of
two SES drives must be installed (Drive 1 and Drive 12 locations).
Power Supply Modules Two Power Supply modules must be fitted. Full power redundancy is
provided while a faulty module is replaced. Install the Power Supply
modules in LH rear Bays (Figure 23)
Cooling Module Install in rear bay, as shown in Figure 23
SR1202 RAID Controller
Module
1 or 2 SR1202 RAID Controller Modules are Installed horizontally (one
above the other) in the RH rear Bay (Figure 23), according to required
configuration.
!
CAUTION
Blank Modules or Dummy Carriers MUST be fitted to ALL unused bays, there will be inadequate
drive cooling if any are left open.
Figure 23. Module locations
- Technical User Guide 1
- MAXDATA SR1202 M1 1
- 2 Contents 2
- Contents 3
- 3 Getting Started 27 4
- 4 Operation 37 4
- 6 Contents 6
- 1 Preface 7
- European Regulations 8
- ATTENTION 8
- 240 VAC 9
- WARNING 10
- CAUTION 10
- Battery Safety 11
- Expansion Connectors 11
- Rack System Precautions 11
- Special Tools and Equipment 12
- ESD Precautions 12
- Data Security 12
- 2 Introduction 13
- The Enclosure Core Product 14
- Enclosure Chassis 14
- Operator’s Panel 15
- Visible Alarms 16
- Audible Alarms 16
- The Plug-in Modules 17
- Multiple Power Supply Modules 18
- Cooling Module 18
- SR1202 RAID Controller Module 19
- StorView 21
- Management Module 21
- Battery Module 21
- Drive Carrier Module 22
- Drive Status Indicators 23
- Anti-tamper Locks 23
- Dummy Carrier Modules 23
- Blank Modules 23
- Technical Specifications 24
- 3 Getting Started 27
- Module Installation 30
- Management Interfaces 30
- Enclosure Configuration 31
- Fibre Channel Interface 31
- Enclosures Expansion 33
- Drive Slot Arrangement 33
- Power Cord Connection 34
- Grounding Checks 35
- 4 Operation 37
- Power Down 38
- Overview 39
- Power Supply Module LEDs 40
- Cooling Module LEDs 40
- Ops Panel LEDs 40
- Audible Alarm 42
- Drive Carrier Module Faults 43
- NOTES 43
- Troubleshooting 44
- Thermal Control 45
- Thermal Alarm 45
- Thermal Warnings 45
- Dealing with Hardware Faults 46
- Replacing a Module 46
- Power Supply Modules 47
- Installing a Cooling Module 49
- IMPORTANT 52
- Installing a Battery Module 54
Teka GKST 90-35 i4 Profi manuali
Manuali dei proprietari e guide per l'utente per Piani cottura Teka GKST 90-35 i4 Profi.
We fornisce 1 manuali pdf Teka GKST 90-35 i4 Profi per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Commentaires sur ces manuels